The LensUltra VND Filters can be attached to various lenses in our LensUltra Series and lenses of your smartphone. To do so, simply follow the steps outlined below.
I. Using the LensUltra VND Filter with LensUltra 75mm Long Range Macro, 60mm Telephoto, and 16mm Wide Angle
+
- When using the LensUltra VND Filter with 75mm Long Range Macro, 60mm Telephoto, and 16mm Wide Angle, you can directly attach the filter to these lenses.
Step 1: Remove the protection ring on top of the lens by gently twisting it counterclockwise.
Step 2: Place the VND Filter on top of the LensUltra lens.
Step 3: Align the threads of the filter and the lens, then securely twist it clockwise until it sits firmly in place.
Step 4: You are now ready to capture photos or videos with your Lensultra lens and VND Filter.
II. Using the LensUltra VND Filter with 1.33x and 1.55x Anamorphic lenses
+
- When using the LensUltra VND Filter with 1.33x and 1.55x Anamorphic lenses, you have to use the Anamorphic Filter Adapter to attach the filter.
Step 1: Attach the Anamorphic Filter Adapter to the Anamorphic lens.
a. Gently push down the adapter onto the lens until it fits perfectly.
b. Ensure that the Anamorphic Filter Adapter thread is facing up.
Step 2: Place the VND Filter on top of the LensUltra Filter Adapter.
Step 3: Align the threads of the filter and the adapter, then securely twist it clockwise until it sits firmly in place.
Step 4: You are now ready to capture photos or videos with your Lensultra Anamorphic and VND Filter.
III. Using the LensUltra VND Filter directly to your smartphone lens
+
- To attach the LensUltra VND Filter directly to your smartphone's lens, you have to use the Direct-To-Mobile Filter Adapter.
Step 1: Attach the LensUltra VND Filter to your Direct-To-Mobile Filter Adapter.
a. Place the filter on top of the adapter.
b. Align the threads of the filter and the adapter.
c. Securely twist it clockwise until it sits firmly in place.
Step 2. You can now attach your setup to your smartphone and be ready to capture photos or videos with your LensUltra VND Filter.
IV. Adjusting the 2-5 Stops and 6-9 Stops VND Effect:
- To adjust the level of neutral density with the 2 to 5 stops and 6 to 9 stops VND filter, simply rotate the outer ring of the filter. As you turn the ring, the filter will darken or lighten the image, providing you with 2 to 5 stops or 6 to 9 stops.
Reminder: The LensUltra VND Filters are not compatible with certain lenses, including the 200° Fisheye and the 10x Traditional Macro Lens.
Comments
0 comments
Article is closed for comments.