Getting Started with your Fill Light Mini

Enhance your mobile photography, videography, vlogging, and more with our compact and portable Fill Light Mini. To get started, follow these steps: 

Step 1: Charge the Fill Light Mini.

Before using the Fill Light Mini, make sure it's fully charged. Connect the provided charging cable to the Fill Light Mini and plug it into a power source. 

Step 2: Power On/Off.

To turn on the Fill Light Mini, press and hold the power button for a few seconds until the light turns on. To turn it off, press and hold the power button again until the light turns off.

Step 3: Adjust Brightness.

Cycle through the different brightness settings by short-pressing the power button until you find the desired level.

Step 4: Attach the Cold Shoe Mount Adapter.

Align the cold shoe mount adapter with the 1/4" Tripod Screw on the Fill Light Mini and screw it in securely.

Step 5: Lock the Fill Light Mini in Place.

Tighten the upper wheel on the cold shoe mount adapter to secure the Fill Light Mini in place.

Step 6: Lock the Fill Light Mini onto the Cold Shoe Mount.

Loosen the lower wheel, insert it into the cold shoe mount, and then tighten the lower wheel to secure the Fill Light Mini onto the mount.

Step 7: Ready to use.

Once attached and adjusted, your Fill Light Mini is ready to use! Capture selfies, videos, or join video calls with enhanced lighting for better results.